VANTAGE-300,ogp

VANTAGE-300

Large Capacity Dimensional Metrology on a Benchtop

Precision dimensional metrology with minimal measurement uncertainty.A range of sensor technologies to address every dimensional attribute. A patented “elevating bridge” design with 300x300x250 mm measuring volume -- yet small enough to fit on a benchtop. SmartScope® Vantage™ 300 provides the measurement versatility needed for the most critical and demanding parts.

Vantage 300 has patented TeleStar® 10:1 metrology zoom optics that are fully telecentric, continuously variable, and are AccuCentric®, auto- calibrating at every magnification change. SmartScope Vantage has a level of optical imaging performance previously thought possible only in fixed lens systems, with the functionality of a continuously variable zoom lens.

In addition to its excellent video measuring performance, Vantage 300 is fully multisensor capable, available with touch probe, TTL laser, micro- probes, rotary tables, and even the SP25 continuous contact scanning probe, as well as rotary tables and the helpful laser pointer. Powerful MeasureMind® 3D MultiSensor metrology software makes it easy to program the most detailed multisensor measurement sequence which then runs automatically. View and interact with measured results to make intelligent product and process decisions.

SmartScope Vantage 300 joins the family of dependable OGP measurement systems used by manufacturers around the world to maintain and improve the quality of parts that go into products we all use every day.

Standard

Measuring range (XYZ): 300 x 300 x 250 mm
Measuring unit dimensions (approx LWH): 80 x 85 x 80cm, 150 kg
Shipping crate dimensions (approx LWH): 150 x 112 x 115 cm, 180 kg
Scale resolution: 0.1 µm
Motor drives: DC servo with joystick control (X, Y, Z, zoom)
Worktable: Hardcoat anodized with fixture holes and removable stage glass, 25 kg load capacity
Mechanical design: Patented† “elevating bridge” design yields large XYZ travel with compact machine size

Zoom lens: Patented†† 10:1 AccuCentric® TeleStar® auto-calibrating, telecentric, mag range 0.8x – 8x
Camera: High resolution, grayscale with 768 x 494 pixel array
Illumination: Patented††† LED numeric aperture matching substage, LED coaxial TTL surface, patented†††† 8 sector/6 ring SmartRing™ LED
Multisensor options: Touch probe and change rack, SP25 scanning probe, on-axis TTL laser, Feather Probe™, Rainbow Probe™
Hardware options: Rotary indexers, fixtures, calibration artifacts

Power requirements: 100/120/220/240 vac, ± 5%, 50/60 Hz, 1 f, 700 W
Rated environment: 18-22° C ± 2° C/hr, 30-80% humidity (non-condensing), vibration <0.0015g below 15 Hz
Operating environment: 15-30° C

Metrology software: OGP MeasureMind® 3D MultiSensor
Computer: Minimum configuration Pentium® processor @ 3.0 GHz, 1 GB RAM, 40 GB hard drive, 1.44 MB floppy, CD-ROM, parallel, serial, and USB 2.0 ports, on board 10/100 LAN
Operating system: Microsoft® Windows™ XP

Warranty: One year

†Patent Number 6,518,996 ††Patent Numbers: 5,389,774 (AccuCentric); 6,292,306 (TeleStar) †††Patent Number 6,161,940 ††††Patent Number 5,690,417

*Applies to thermally stable system in rated environment, maximum zoom lens setting, and evenly distributed 5 kg load. Depending on load distribution, accuracy at maximum rated load may be less than standard accuracy. XY axis artifact: QVI 25 intersection grid reticle at standard measuring plane. Z axis artifact: QVI step gage or master gage blocks.

Optical Gaging Products.Precision For People.

VANTAGE-300